The healing screw is screwed onto the implant with the aim of promoting healing and conditioning of the soft gingival tissues, suitably adapted by suturing around it. Their rehabilitation allows the insertion of a definitive prosthetic stump.

	Recommended torque 10 N.cm
	Platforms 3.5 | 4.3
	Titanium Grade 5
	Driver: Unigrip

The compatible analogue *NOBEL is used by the dental technician after the dentist has taken an impression. By pouring plaster into the impression we will have a model on which to build the prosthesis.

	Recommended torque 30 N.cm
	Platforms 3.5 | 4.3
	Titanium Grade 5

The Straight Abutment is an abutment made of titanium grade 5, available in different diameters and various heights. Suitable for making fixed prostheses.

	Torque consigliato 30 N.cm
	Piattaforme  3.5 |  4.3
	Titanio Grado 5
	Driver: UniGrip
	Consegnato con la vite in titanio

The Angled Abutment is an abutment made of titanium grade 5, for a cemented prosthesis with screw included. Both the 15° and 25° are available. The use of angled abutments is recommended to improve the axis of the implant in a fixed prosthesis.

	Recommended torque 30 N.cm
	Platforms 3.5 | 4.3
	Titanium Grade 5
	Driver: UniGrip
	Delivered with the screw

I transfert pickup si utilizzano nella fase di presa dell’impronta su monconi per protesi avvitata già fissati agli impianti per replicare con esattezza sul modello di laboratorio la posizione definitiva dei monconi.

	Recommended torque 10 N.cm
	Platforms 3.5 | 4.3
	Titanium Grade 5
	Driver: UniGrip
	Delivered with the screw

The compatible abutments and calcinable abutments are the most economical and practical prosthetic solution in the implant field, it consists of a base in castable material such as Plexiglas or Pom that allow the dental technician to model a wax for implantology starting from a preconstructed base in castable.

	Delivered with the screw
	Recommended torque 20 N.cm
	Platforms 3.5| 4.3
	Titanium Grade 5
	Driver: UniGrip

The castable abutment based on cobalt chrome offers a convenient solution with extraordinary flexibility for both the technician and the modeler, thanks to its gingival emergence profile adaptable according to individual needs.

	Recommended Torque 30 N.cm
	Platforms 3.5 | 4.3
	CR-CO
	Driver: Unigrip
	Delivered with the screw

Straight MUA is mainly used for the All on Four technique; its characteristic is that of releasing the forces to the plant itself.

	Recommended torque 30 N.cm
	Platforms 3.5 | 4.3
	Titanium Grade 5

Angled Mua is mainly used for the "All on Four" technique when we need to parallelize non-parallel implants.

	Recommended torque 30 N.cm
	Platforms 3.5 | 4.3
	Titanium Grade 5
	Driver: Unigrip
	Delivered with the screw